High Quality Wire Mesh Mist Eliminator

<

Model NO.: M-1509
Hole Shape: Irregular
Structure: Single Network
Trademark: MWN
Transport Package: Wooden Case or Carton
Specification: 12"OD x 6" thick
Origin: China
HS Code: 73144900
Wire Mesh Demister (also is known as mist eliminator, demister pads) is a highly efficient gas-liquid separation device.
Features:
1. High collection efficiency of up to 99% of fluid at velocity of 1 to 8m/sec
2. Provides free area of up to 98% for operation and low pressure drop (0.1" ~ 1.0" W/G)
3. A variety of materials in accordance with temperature and corrosion resistance
4. Easy to install by using manhole. Usable without any restriction and replaceable with existing facilities
5. Designed for self - cleaning (semi - permanent and economical)
           pattern                                  Specification
Standard type 40-100 60-150 105-300 140-400 160-400 210-570 252-800 330-1050
Highly effective 60-100 80-100 80-150 90-150 800-400
150-300 200-400 300-600 800-400
High penetration 20-100 30-150 70-400 170-560 170-600
Absorption of shock 30-30 33-30 20-40 26-40 30-40 38-40
30-50 48-50 30-60 30-80 40-80 40-120 50-120
           Style                                     Applications
DSM-80 Provides low pressure drop at high velocity and general collection efficiency. Used for collecting lager particles.
DSM-144 Mainly used in the field of petrochemical plants. Provides relatively low pressure drop and collection efficiency
of up to 90~99%
DSM-193 Most commonly used. Provides collection efficiency of up to 98~99% on 5~10 microns at velocity of 1~5m/sec.
DSM-390 Provides high pressure drop at low velocity of 1m/sec and collecion efficiency of up to 90% or greater.
DSM-220 Used for collecting minute particles sized for 1 micron, Thicker is better in case of minute particles with low density (approximately 10g/m3)
DSM-432 Used for collecting sub-micron particles 0.05~1 micronc More effective than DS-220 Style
Selection of Demister
The below table as standard style has selected through referred articles, practical consumers
and the company research for most suitable type according to the broad ranges of usage for
DEMISTERSMS recently. It helps to identify basic type for use and refer to change of
specifications as standards.
  DENSITY(kg/m3) FREE AREA(%) SURFACE AREA(m2/m3) EQ STYLE
SUS P.P SUS P.P SUS P.P YORK NIHON MESH GOTO SHOJI
DSM-80 80 30 98.9 96.7 155 495 931 H H155
DSM-120 120 - 98.5 - 210 - 631 L  
DSM-128 128 - 98.4 - 460 - 326 SN  
DSM-144 144 38 98.2 95.8 275 630 431 N S275
DSM-193 193 42 97.6 95.4 378 690 421 SL S370
DSM-300 300 - 96.2 - 575 - - SM  
DSM-390 390 - 95 - 740 - - SH S740
DSM-220 220 - 97.2 - 905 - - T M905
DSM-432 432 - 94.5 - 1780 - 800 R M1740
DSM-GRASS 160 80 96.7 94.7 5000 -   G.S/G.P  
Installation and Grid
DEMISTER in tower must be fixed and supported at level and Support Grid is commonly used for fixing bottom side or the upper and lower sides, which was made by welding FB 25x3t. RB6 (the same material with DEMISTER PAD) at regular intervals (APP 150mm). In addition wire of diameter 1 or 1.6 is used for fixing GRID and PAD and how to fix them as follows.

Cold Resistant Conveyor Belt

Heat Resistant Conveyor Belt Steel Cord Conveyor Belt Co., Ltd. , http://www.nsepconveyorbelt.com