Square Gutter Roll Forming Machine, Gutter Forming Machine , Gutter Roll Forming Machine,Rain Gutter Roll Forming Machine, Raingutter Making Machine
Quick Detail
1.Suitable to process: Color steel plate
2.Width of the plate: 333mm
3.Rollers: Depends to drawing
4.Dimensions: 10.7*1.35*1.51m
5.Power: 3+3kw
6.Rolling material: high grade 45# steel(plated chrome on surface)
7.Thickness of the plate:0.4-0.6mm
8.Voltage: 380V 50Hz 3phases
9.Material of the cutting plate: Cr12
10.Hydraulic: 40#
11.Processing precision: Within 1.00mm
12.Control system: PLC control
Square Gutter Roll Forming Machine Square Gutter Roll Forming Machine, Gutter Forming Machine, Gutter Roll Forming Machine,Rain Gutter Roll Forming Machine, Raingutter Making Machine Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl
Upper check adopts left hand thread but the lower adopts right hand thread, and they are identical in structure of ball valve.
Appliances
The rated working pressure of Kelly check valve should be equal to the rated pressure of BOP, the ID of check should be larger than (or equal to) the ID of Kelly rod, Max working pressure and test pressure should be tested according the requirement listed in the below table, Holding pressure for 3 minutes without leakage is considered as a qualified sealing test, appliance for check is up to 82 Deg. C. And the check wrench should stay the available/usable position.
Feature
Upper check valve consists of valve body, upper/lower seat, ball body, rotary-block, retainer, spring and non-metal seals etc.
Valve body is ASTM4140 forging, and the machinery properties after heat treatment can meet the requirementof API Spec 7.
Valve seat and ball body are made of heat-resistant stainless steel with abrasion and corrosion resistance.
The valve is single direction seal, as the valve is closed, under the co-reaction of fluid pressure under well and pre-load spring pressure, the ball body approaches to the back-seat quickly so as to create a seal. As for the sealing face of back-seat adds a PTFE nonmetal ring and reduce the compact of ball body to valve seat, So that it should have more reliable performance.
The surface of the valve body stamped with visiblesign of " open" or " close' indicates the open/close station of check valve obviously
Parts List:
Item
Component
Qty
Material
1
Handle
1
1045
2
Rotary-Block
1
4130
3
O-Ring
1
NBR
4
Body
1
4130
5
Spring
8
1566
6
Lower Seat
1
410
7
Ball
1
410
8
Lower Retainer
1
410
9
O-Ring
1
NBR
10
Upper Seat
1
410
11
Upper Retainer
1
4130
12
Retainer
1
410
13
Circlip
1
1566
Upper check adopts left hand thread but the lower adopts right hand thread, and they are identical in structure of ball valve.
Appliances
The rated working pressure of Kelly check valve should be equal to the rated pressure of BOP, the ID of check should be larger than (or equal to) the ID of Kelly rod, Max working pressure and test pressure should be tested according the requirement listed in the below table, Holding pressure for 3 minutes without leakage is considered as a qualified sealing test, appliance for check is up to 82 Deg. C. And the check wrench should stay the available/usable position.
Feature
Upper check valve consists of valve body, upper/lower seat, ball body, rotary-block, retainer, spring and non-metal seals etc.
Valve body is ASTM4140 forging, and the machinery properties after heat treatment can meet the requirementof API Spec 7.
Valve seat and ball body are made of heat-resistant stainless steel with abrasion and corrosion resistance.
The valve is single direction seal, as the valve is closed, under the co-reaction of fluid pressure under well and pre-load spring pressure, the ball body approaches to the back-seat quickly so as to create a seal. As for the sealing face of back-seat adds a PTFE nonmetal ring and reduce the compact of ball body to valve seat, So that it should have more reliable performance.
The surface of the valve body stamped with visiblesign of " open" or " close' indicates the open/close station of check valve obviously
Parts List:
Item
Component
Qty
Material
1
Handle
1
1045
2
Rotary-Block
1
4130
3
O-Ring
1
NBR
4
Body
1
4130
5
Spring
8
1566
6
Lower Seat
1
410
7
Ball
1
410
8
Lower Retainer
1
410
9
O-Ring
1
NBR
10
Upper Seat
1
410
11
Upper Retainer
1
4130
12
Retainer
1
410
13
Circlip
1
1566
Inside Bop - for Petroleum Equipment
Model NO.: CDIB
Origin: China
HS Code: 84314310
Model NO.: CDIB
Origin: China
HS Code: 84314310
Inside BOP-Kelly check valve is a constant-open type blowout protection assembly in drilling tool, as well kick happens, it can be closed and prevent fluid under ground from gushing up through the water hole in drilling column. In well control operation, if hose and high-pressure manifold is damaged, it can be replaced in safety under the valve being closes.