UV Laser Glass Bottle Glass Cup Marker

<

Model NO.: UV-3/5/7/10-D02
Laser Classification: Semiconductor Laser
Engraving Method: Vector Engraving
CNC Yes or Not: Yes
Trademark: DP
Transport Package: Wood
Specification: 68*65*145cm
Origin: China
HS Code: 8443393200
UV Laser Glass Bottle Glass Cup Marker

                 UV laser glass bottle glass cup marker

 
UV laser marking machine, using the 355nm UV laser research and development and, using three order intracavity frequency doubling technology, into the international advanced technology, high energy ultraviolet photons direct damage many nonmetallic materials surface molecules, molecules from the object, in this way will not produce high quantity of heat, ultraviolet laser gathering spot minima and processing of almost no heat effect, therefore is called cold processing, so it can be used to special material ultra fine marking and engraving.
 
 
Properties:
Laser type ultraviolet green
 Laser wavelength 355nm
Laser power 3w/5w/7w/10w
Standard engraving range 100mm*100mm
Optional marking range 50mm*50mm,150mm*150mm, 180mm*180mm
Engraving speed less than or equal to 10000mm/s
Outline dimension (W*D*H) 68*65*145cm
Weight: 120kg
Power demand Ac220V + 10%.50Hz-60Hz.5Amp
Cooling mode Water Cooling
Operating temperature: 10-35 DEG C
humidity: 5%-75% (non-condensing)
 
 
Product description:
Working principle and characteristics:
Dapeng laser and UV play labeling machine series products into the international advanced technology, high energy ultraviolet photons direct damage many nonmetallic materials surface molecules, molecules from the object, in this way will not produce high quantity of heat, ultraviolet laser gathering spot minima and processing almost no heat affected, therefore is called cold processing, so it can be used to special material ultra fine marking and engraving.
 
Product advantage:
1. Short UV laser wave length, smaller focused spot, can realize ultra fine marking;
2. is cold processing, small heat affected zone, avoid damage to materials to be processed, high rate of finished products
3. applicable materials widely, make up the deficiency of the infrared laser processing capacity;
4. using high-speed digital galvanometer marking speed, high efficiency, high precision;
5. without supplies, use cost and maintenance cost is low; the performance is stable, long-term operation.
 
Industry application:
UV laser light spot is very small, and there is almost no heat affected, so it is called cold processing, which is suitable for special materials, super fine marking and engraving. Mainly used for ultra precision machining of the high-end market, cosmetics, medicines, food and other polymer materials of the surface of the packing bottle marking; flexible PCB board marking, dicing; silicon wafer micro hole, blind hole processing; LCD glass two-dimensional code marking, glassware play standard, metal surface coating removal, plastic buttons, electronic components, communication equipment.
 
Flexible and convenient operating system:
User friendly operation, equipment operation stability is good; the special control software can be compatible with AutoCAD, CorelDRAW, Photoshop and other softwares output; can realize text symbols, graphics, bar code, two-dimensional code, serial number and so on automatic editing and modification; support PLT, PCX, DXF, BMP, JPG and other file formats can be used directly TTF font; CCD automatic identification tracking and positioning;
 
Working environment requirements:
1. environmental temperature requirements at 10-35 DEG C, air conditioning requirements;
2. temperature requirements for < 60%. No condensation, should install dehumidifier;
3. power supply requirements: 220V; 50HZ/60HZ;
4. power supply fluctuation: + 15%, grid wires meet international requirements. Area voltage amplitude of 15% or more, should install the electronic type automatic voltage regulator, stabilizer;
5. shall be installed near the equipment without strong electromagnetic interference. Around the installation to avoid a radio transmitter station (or trunk);
6. Foundation: less than 50Um; the amplitude of vibration acceleration: less than 0.05g. Avoid a large number of press and other equipment in the vicinity of the press;
In the equipment space requirements to ensure smokeless clean, avoid metal polishing and grinding dust serious working environment;
7. air pressure: 86-106kpa
In some environment should be installed anti-static floor, strengthen shielding;
Exergy cooling circulating water quality has strict requirements, require the use of pure water, deionized water or distilled water, can not use of water, mineral water, etc. liquid with high metal ion or other minerals.

Marking samples but not limited.

UV Laser Glass Bottle Glass Cup Marker
 

LINA Dispersion Kneader with PLC Control System

All types of LIAN Kneader Mixer can install PLC (Programmable Logic Controller) system to monitor the machine`s working process, such as temperature control, mixing time control, pressure control and data import and export. A touch screen is installed to manage the system and shows graphic data, Moreover, an Ethernet communication interface and 20% of the control points are reserved. 

Dispersion Kneader with PLC Control System

Advantages of PLC Control and Data Export:

1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code.

2. The control system can be set up to 20 mixing steps, save 20 recipe spaces.

3. The control system is capable of remote importing of the process recipe and data monitoring and communicating with MES via Ethernet communication interface.

4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.

Dispersion Kneader with PLCDispersion Kneader

PLC Control Dispersion Kneader

PLC Control Internal Mixer,PLC Farrel Banbury Mixer,PLC Banbury Mixer Process

LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com