Scrap Copper Wire Recycling Line

<

Model NO.: qjf
Function: Waste Copper Wire Recycling
Output: Clean Copper Pellet&Plastic Pellet
Applicable Copper Wire: 0.3-20mm Diameter
Capacity: 600-800kg/H
Power Support: Electric
Power: 75.4kw
Voltage: Customized
Dimension: 9.1*2.3*3.54m
Weight: 8000kg
Trademark: jingliang
Transport Package: Container&Ply Wooden Case
Specification: 11-75KW
Origin: China
HS Code: 84798190
Model NO.: qjf
Function: Waste Copper Wire Recycling
Output: Clean Copper Pellet&Plastic Pellet
Applicable Copper Wire: 0.3-20mm Diameter
Capacity: 600-800kg/H
Power Support: Electric
Power: 75.4kw
Voltage: Customized
Dimension: 9.1*2.3*3.54m
Weight: 8000kg
Trademark: jingliang
Transport Package: Container&Ply Wooden Case
Specification: 11-75KW
Origin: China
HS Code: 84798190
scrap copper wire recycling line Features: 
This scrap copper wire recycling line is used for recycling scrap copper wires and cables, like automobile wires, telecommunication wires, and other kinds of copper wires, in order to recover copper. This scrap copper wire recycling line is consisted of Crusher, Crushed Material Channel, Vibrating Separator, Air Blower, Dust Collector, and the Underbed, etc..

scrap copper wire recycling line Application: 
scrap copper wire recycling line used for crushing copper cable and seperating them.  
Applicable copper wires: 
Scrap Copper Wire Recycling Line 
Scrap Copper Wire Recycling Line
scrap copper wire recycling line Processing Procedures:
  1. Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
  2. The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
  3. The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
  4. All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
scrap copper wire recycling line Technical Parameters: 
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-400-1 80-100kg/h  
 
0.3-20mm
11.92KW  
 
Adjustable
1.5*1.5*1.9m 750kg
QJF-400 200-300kg/h 23.12KW 2.7*1.9*2.3m 1200kg
QJF-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
QJF-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
QJF-800 600-700kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
   
scrap copper wire recycling line Different Models:  
Scrap Copper Wire Recycling Line
Scrap Copper Wire Recycling Line
Scrap Copper Wire Recycling Line
Scrap Copper Wire Recycling Line
FAQ 
 1.Is there quick-wear part on the machine? 
The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
 2. What's the lognest continuous working time for the recycling machine?   
 Normally 10 hours per day. 

 3.Is the machine easy to operate? How many workers required to operate it? 
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.


Contact information:  
Attn: Tina Ge 
Mobile:+8615981925357 
 
 
scrap copper wire recycling line Features: 
This scrap copper wire recycling line is used for recycling scrap copper wires and cables, like automobile wires, telecommunication wires, and other kinds of copper wires, in order to recover copper. This scrap copper wire recycling line is consisted of Crusher, Crushed Material Channel, Vibrating Separator, Air Blower, Dust Collector, and the Underbed, etc..

scrap copper wire recycling line Application: 
scrap copper wire recycling line used for crushing copper cable and seperating them.  
Applicable copper wires: 
Scrap Copper Wire Recycling Line 
Scrap Copper Wire Recycling Line
scrap copper wire recycling line Processing Procedures:
  1. Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
  2. The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
  3. The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
  4. All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
scrap copper wire recycling line Technical Parameters: 
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-400-1 80-100kg/h  
 
0.3-20mm
11.92KW  
 
Adjustable
1.5*1.5*1.9m 750kg
QJF-400 200-300kg/h 23.12KW 2.7*1.9*2.3m 1200kg
QJF-600A 300-400kg/h 48.36KW 4*1.85*2.4m 3400kg
QJF-600 300-400kg/h 52.36KW 4.3*1.95*2.4m 3400kg
QJF-800 600-700kg/h 0.1-40mm 75.4KW 9.1*2.3*3.54m 8000kg
   
scrap copper wire recycling line Different Models:  
Scrap Copper Wire Recycling Line
Scrap Copper Wire Recycling Line
Scrap Copper Wire Recycling Line
Scrap Copper Wire Recycling Line
FAQ 
 1.Is there quick-wear part on the machine? 
The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
 2. What's the lognest continuous working time for the recycling machine?   
 Normally 10 hours per day. 

 3.Is the machine easy to operate? How many workers required to operate it? 
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.


Contact information:  
Attn: Tina Ge 
Mobile:+8615981925357 
 
 

3 AXIS

CNC Router

Qingdao SUBA CNC Technology Co., Ltd , https://www.cncrouter-china.com