Concentrator crushing job duties

<

1. Strictly abide by the “Employee Handbook” and various rules and regulations of the factory, obey the leadership arrangements, and complete daily tasks;

2, in strict accordance with technical requirements and timely open parking, to complete production deadlines, timely removal of the sleepers ore, iron and other debris, broken observed particle size, chunk found in time for adjustment of the port of discharge gap can not stop with a load;

3. Start parking in strict accordance with the process requirements, complete the production tasks of the month on time, strengthen the connection between the upper and lower processes, and ensure normal production. Check the crushed ore size in time to ensure the particle size is qualified. Timely measurement of the gap of the discharge port, out of range, and immediate adjustment;

4. Responsible for the use, maintenance and management of the equipment belonging to this position. Strictly implement the equipment inspection system, equipment maintenance system and equipment operation system to continuously improve the equipment integrity rate;

5. Familiar with the specifications, performance, structure, maintenance and operation of the equipment, and achieve “three good” and “four meetings”, and strive to improve the equipment condition and operation technology level;

6. Establish the idea of ​​“safety first”, implement the safety management system of the plant selection, job safety duties, safety operation procedures and action standards for production posts, and eliminate the occurrence of personal and equipment accidents;

7. Comply with labor discipline, post discipline, and strict handover system;

8. Fill in the equipment operation record carefully, so that the records are complete, clear, and the data is true, and the equipment and regional sanitation of the post are well done;

9. Do a good job in anti-theft and anti-theft work to prevent the loss of public property and protect the assets of the factory.

Hose reel irrigator Aquago II 60mm

The hose reel irrigator adopts the hydraulic turbine type power drive system.With the design of large section and small pressure, a high recovery speed can be achieved under a small flow rate. The water turbine speed leads a two-speed belt drive device from the water turbine shaft into the reducer. After the reduction, the chain drive generates a large torque force to drive the winch, so as to realize the automatic recovery of PE pipe.At the same time, the rotating high-pressure water flow through the vortex is sent directly to the sprinkler head through the PE pipe. The sprinkler head will spray the high-pressure water flow evenly over the crops, and the small droplets will fall down evenly, and the spray operation will be carried out intermittently with the movement of the PE pipe.

Mobile Irrigation Equipment,Field Sprinkler Agricultural Irrigation,Sprinkler In Agriculture,60Mm Hose Reel Irrigator

Shandong H.T-BAUER Water and Agricultural Machinery & Engineering Co., Ltd. , https://www.ht-bauer.com