(1) According to the thickness of the ore body and the single design requirements of the ore body, the electric roadway can be arranged along the strike or cut direction. (2) The electric ramp should meet the following requirements: 1) In order to fully release the ore of the last funnel, the electric ramp should exceed the last funnel, and its length is not less than 5.5 to 6.0 meters. 2) Considering the convenience of operating the electric power and the influence of the electric winch on the secondary crushing, the length of the winch chamber is generally 4.0 to 5.5 meters. The safety distance from the side of the mine to the winch is 2-3 meters. 3) The junction of the electric ramp and the mine discharge shaft should be appropriately widened to ensure the safety of pedestrians. 4) When two or more electric rafts are arranged, the center distance is 10-15 meters. (The red-transparent mountain mine actually uses 15 to 17 meters). 5) The electric rafts are generally arranged horizontally, but they are also arranged along the slope, and the inclination angle should not be greater than 25 ° ~ 30 °, the slope of the ramp is high efficiency, but when handling card leakage and secondary crushing, the safety is poor. 6) The slipway can not be dug in a certain funnel, and must be staggered by a certain distance (4 meters in the book, the key to see the natural angle of the ore of the ore, generally must be more than 2 meters.) Otherwise, the processing of bulk and card leakage It is very difficult. 7) There are two ventilation pedestrian safety exits in the electric roadway, which cannot be designed as a single-head electric roadway. 8) The floor of the winch chamber should be lower than the level of the other side of the chute (0.3 to 0.3 m), which is beneficial to the antimony ore. Powder Benzoin For Powder Coating
Application:
As a degass agent should be add to premix with 0.3~0.5% of total frmulation for degassing bubbles during extrusion to eliminate or reduce those imperfections like pinholes. It can be applied in all kind of powder coatings.
yellowing phenomena.
Our Advantage & Service:
Powder Coating Benzoin,Degassing Agent Benzoin,Powder Coating Anti-Yellowing Benzoin,Powder Coating Diphenylethanone Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com
-Technical Support Online Service Provided
According to customer's requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
-On-site Training Service Provided
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers' requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage)
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.
Electric roadway layout
The acurate amount should be obtained in lab. The dosage should be properly controlled to get suitable film, as superfluous Benzoin may cause